Description

Tatonka Yukon 70+10 BC Bushcraft Backpack

The Tatonka Yukon 70+10 BC is a large, individually configurable bushcraft and trekking backpack made from robust CORDURA® material. It offers a total capacity of up to 80 litres, combining a 70-litre main volume with an additional 10 litres of expandable capacity.

A MOLLE-compatible attachment system on the front, sides and one hip fin allows compatible pouches, tools and bushcraft equipment to be added according to the user’s requirements. The removable lid can be attached to the shoulder straps as a front pouch or used separately as a shoulder bag.

The proven V2 Carrying System is adjustable to the wearer’s back length and optimised for loads of up to approximately 25 kg. It transfers much of the load to the pelvic area, supporting balanced and back-friendly carrying during longer journeys.

The backpack is made primarily from CORDURA® 500 den and 420 HD Nylon FD, both composed of 100% polyamide. Its water-repellent treatment is described as PFC/PFAS-free, and an olive-coloured rain cover is integrated into the bottom compartment.

Key Features

• Large bushcraft and trekking backpack
• Expandable 70+10-litre design
• Total maximum volume: approximately 80 litres
• Adjustable V2 Carrying System
• Optimised for loads up to approximately 25 kg
• Efficient load transfer to the pelvic area
• Main material: CORDURA® 500 den
• Secondary material: 420 HD Nylon FD
• 100% polyamide construction
• PFC/PFAS-free DWR finish
• MOLLE-compatible attachment system on the front
• MOLLE attachment on both sides
• MOLLE attachment on one hip fin
• Modular attachment system for compatible pouches and equipment
• Removable lid
• Lid can be attached to the shoulder straps as a front pouch
• Lid can be used separately as a shoulder bag
• Large front opening for direct access to the main compartment
• Separate bottom compartment
• Removable divider between main and bottom compartments
• Integrated olive rain cover
• Hydration-system compatible
• First-aid compartment; contents not included
• Large zipped front pocket
• Elastic side pockets
• Strong No. 10 zipper
• Lockable zipper sliders
• Double-layer bottom

Expandable 70+10-Litre Capacity

The Yukon 70+10 BC provides approximately 70 litres of standard storage capacity, with an additional 10 litres available through the expandable upper section. This gives the backpack a maximum stated volume of approximately 80 litres.

The large capacity is suitable for multi-day trekking, bushcraft equipment, winter clothing, shelter systems, cooking equipment and other bulky outdoor loads.

V2 Carrying System

The adjustable V2 Carrying System is designed for carrying heavier trekking loads and can be adapted to the wearer’s back length. Its construction transfers a substantial portion of the load from the shoulders to the hips and pelvic area.

The system is optimised for carrying loads of up to approximately 25 kg. Actual comfort depends on the wearer’s physical condition, fit adjustment, terrain and how the equipment is distributed inside the backpack.

Adjustable Load Control

Load-control straps allow the upper section of the backpack to be pulled closer to the wearer’s body. This improves balance and helps reduce backward movement of the load.

Side compression straps and the all-round compression system around the raised bottom can be used to stabilise partially filled loads and reduce movement inside the pack.

Padded Shoulder Straps and Adjustable Chest Strap

The padded shoulder straps support comfortable load distribution during prolonged use. The chest strap is height adjustable and can be secured in two different positions.

Correct adjustment helps keep the shoulder straps aligned and reduces unwanted lateral movement during walking.

Single-Hand Hip-Belt Adjustment

The hip-belt attachment is routed through a special construction that allows the fit to be tightened with one hand. This makes it easier to adjust the load while wearing the backpack.

One hip fin includes a zipped pocket for small items that need to remain accessible while moving.

Modular MOLLE-Compatible Attachment System

The front, sides and one hip fin feature MOLLE-compatible attachment areas. These allow compatible pouches, bottle holders, tool carriers and bushcraft accessories to be added according to the user’s needs.

External equipment should be attached securely and positioned so that it does not interfere with movement, balance, access to the backpack or surrounding vegetation.

Removable Multifunction Lid

The backpack lid can be removed and used in several ways:

• As the conventional upper lid of the backpack
• Attached to the shoulder straps as a front pouch
• Used separately as a shoulder bag

The lid attachment strap also serves as the shoulder strap when the lid is used independently.

Lid Organisation

The removable lid includes:

• Key holder
• Internal insert pocket
• Elastic zigzag lacing on the exterior
• Webbing attachment above the snow guard

The elastic lacing can hold lightweight items such as gloves or a thin outer layer, but heavy or sharp equipment should be secured using more suitable attachment points.

Snow Guard with Dual Drawcords

A snow guard beneath the lid protects the upper opening of the main compartment and allows the expandable section to be closed securely.

Two drawcords allow the opening to be adjusted according to the packed volume and weather conditions.

Main and Bottom Compartments

The backpack includes a separate bottom compartment and a removable divider between the lower and main sections.

With the divider fitted, the lower compartment can be used for a sleeping bag, wet equipment or other items that should remain separate. Removing the divider creates one continuous main compartment.

Large Front Opening

A large front opening provides direct access to the main compartment without requiring all equipment to be removed from the top.

This is useful when retrieving items stored in the centre or lower part of the backpack.

Strong No. 10 Zipper

The backpack uses a strong No. 10 zipper in the main access areas. The zipper sliders can be locked using a suitable small lock or security seal.

A lockable slider may discourage casual access but does not make the backpack theft-proof.

Large Zipped Front Pocket

The voluminous front pocket provides additional storage for flat or frequently accessed equipment. It is suitable for maps, rainwear, gloves, documents and other items that should remain separate from the main compartment.

First-Aid Compartment

A dedicated first-aid compartment supports organised storage of first-aid supplies. The compartment is supplied empty, and medical contents are not included.

The user remains responsible for selecting suitable first-aid equipment according to the activity, environment and level of training.

Hydration-System Compatible

The backpack is prepared for use with a compatible hydration system. A reservoir can be positioned inside the pack, with the drinking tube routed through the appropriate opening.

Hydration bladder, hose and drinking valve are not included unless stated separately.

Integrated Rain Cover

An olive-coloured rain cover is stored inside the bottom compartment. It can be pulled over the packed backpack to provide additional protection during rain.

The rain cover improves weather protection but does not create a fully waterproof seal around the backpack. Sensitive equipment should be packed in suitable waterproof inner bags.

Elastic Side Pockets

Elastic side pockets provide convenient storage for bottles, tent poles, trekking poles or other elongated equipment.

Items should be secured with the side compression straps where possible to prevent loss during movement.

Gear Loops and Carry Handles

Gear loops on the front allow suitable equipment to be attached externally. Carry handles are positioned at both the front and rear for lifting and handling the backpack.

Heavy loads should be lifted using proper technique and not suspended from individual MOLLE loops or light attachment points.

Double Bottom

The base is made from CORDURA® 500 den and uses a double-layer construction to improve resistance to abrasion and wear when the backpack is placed on rough ground.

The bottom is raised along the sides and supported by an all-round compression system.

CORDURA® 500 Den Fabric

The main body and bottom are made from CORDURA® 500 den, a high-strength nylon 6.6 fabric known for abrasion resistance, tear resistance and long-term durability.

The 500-denier construction provides a useful balance between strength and weight for demanding trekking and bushcraft equipment.

420 HD Nylon FD

Selected backpack sections are made from 420 HD Nylon FD. This high-density polyamide fabric provides high tear strength, while its Full-Dull yarn gives the material a matte surface.

The fabric has a triple polyurethane coating that makes the material itself waterproof. However, seams, zippers and openings mean that the complete backpack should not be considered fully waterproof.

PFC/PFAS-Free DWR Finish

The exterior has a durable water-repellent treatment described as PFC/PFAS-free. This helps water bead and run off the outer surface during light rain.

DWR performance may reduce over time through dirt, abrasion and repeated washing. The treatment can be maintained according to the manufacturer’s care instructions.

Patch Area

A 10 × 5 cm loop panel on the front allows compatible hook-backed identification or decorative patches to be attached.

Recommended Use

• Multi-day trekking
• Bushcraft
• Camping
• Expeditions
• Forest and wilderness travel
• Winter outdoor activities
• Long-distance hiking
• Heavy equipment transport
• Emergency preparedness
• Outdoor training

Package Includes

• Tatonka Yukon 70+10 BC backpack
• Removable multifunction lid
• Integrated olive rain cover

Hydration system, first-aid contents, MOLLE pouches, patches and other external accessories are not included unless stated separately.

Technical Specifications

Product Name	Tatonka Yukon 70+10 BC
Brand	Tatonka
Product Type	Large modular bushcraft and trekking backpack
Standard Capacity	70 l
Expandable Capacity	Additional 10 l
Maximum Stated Volume	Approx. 80 l
Dimensions	Approx. 78 × 33 × 24 cm
Weight	Approx. 3.05 kg
Recommended Maximum Load	Up to approximately 25 kg
Carrying System	V2 System
Main Material	CORDURA® 500 den
Secondary Material	420 HD Nylon FD
Bottom Material	CORDURA® 500 den
Material Composition	100% polyamide
Outer Finish	PFC/PFAS-free DWR treatment
Main Compartment Access	Top opening and large front opening
Bottom Compartment	Yes
Compartment Divider	Removable
Lid	Removable and multifunctional
Lid Use	Backpack lid, front pouch or separate shoulder bag
Hydration Compatibility	Yes
Rain Cover	Integrated, olive colour
MOLLE-Compatible Attachment	Front, sides and one hip fin
Patch Panel	Approx. 10 × 5 cm
First-Aid Compartment	Yes; contents not included
Side Pockets	Elastic material
Main Zipper	Strong No. 10 zipper
Zipper Sliders	Lockable
Bottom Construction	Double bottom with raised sides

Packing and Adjustment

1. Place the backpack on a stable surface and open the main compartment.
2. Pack heavy equipment close to the back panel and near the centre of the load.
3. Place lighter and bulky items towards the outside and upper section.
4. Use the bottom compartment for a sleeping bag or equipment requiring separate access.
5. Attach compatible pouches only to suitable MOLLE areas.
6. Close the snow guard and adjust both drawcords.
7. Fit and adjust the lid according to the packed volume.
8. Tighten the side and bottom compression straps.
9. Adjust the V2 System to the wearer’s back length.
10. Tighten the hip belt so that most of the load rests on the hips.
11. Adjust the shoulder straps, load-control straps and chest strap.
12. Walk briefly and readjust the system before beginning a longer journey.

Load Distribution Advice

• Keep the heaviest items close to the back and above the hip-belt level.
• Avoid placing hard or angular equipment directly against the back panel.
• Distribute weight evenly between the left and right sides.
• Secure external equipment to prevent swinging or snagging.
• Do not exceed a load that the wearer can carry safely.
• Reduce the load when travelling over difficult terrain or for prolonged periods.

Care and Maintenance

• Empty the backpack completely before cleaning.
• Remove loose dirt using a soft brush.
• Clean with a damp cloth and mild soap when necessary.
• Do not use bleach, aggressive detergents or solvents.
• Do not machine wash unless expressly permitted by the manufacturer.
• Allow the backpack to air dry completely.
• Do not dry directly on a radiator or near an open flame.
• Keep zippers and hook-and-loop areas free from dirt.
• Inspect straps, buckles, seams and MOLLE webbing regularly.
• Store clean, dry and away from prolonged direct sunlight.
• Allow the rain cover to dry completely before returning it to its compartment.

Safety Information

• Do not exceed a load that can be carried safely and comfortably.
• A heavy or incorrectly adjusted backpack may cause fatigue, imbalance or musculoskeletal injury.
• Use assistance when lifting a heavily loaded backpack.
• Adjust the carrying system before prolonged use.
• Check that all buckles, zippers and compression straps are secured before moving.
• Do not carry sharp tools without suitable sheaths or protective covers.
• Secure external equipment so that it cannot fall, swing or catch on obstacles.
• Keep loose straps away from machinery, vehicles and moving equipment.
• The backpack is not fully waterproof.
• Protect electronics, documents and other moisture-sensitive contents in waterproof inner bags.
• Do not use the backpack to carry a person or animal.
• Keep away from open flames, sparks and excessive heat.
• Remove the backpack from service if load-bearing seams, straps or buckles are seriously damaged.

Why Choose the Tatonka Yukon 70+10 BC?

The Tatonka Yukon 70+10 BC combines the capacity of a large trekking backpack with the modularity required for bushcraft equipment. The MOLLE-compatible attachment system, removable multifunction lid and separate bottom compartment allow the pack to be adapted to different activities and load configurations.

Its adjustable V2 Carrying System is designed for loads up to approximately 25 kg, while CORDURA® 500 den fabric, reinforced bottom construction and a PFC/PFAS-free water-repellent finish support demanding long-term outdoor use.

FAQ

What is the capacity of the Tatonka Yukon 70+10 BC?

The backpack has a 70-litre standard capacity with an additional 10 litres of expandable space, giving a maximum stated volume of approximately 80 litres.

How much does the backpack weigh?

It weighs approximately 3.05 kg.

What load is the carrying system designed for?

The V2 Carrying System is optimised for loads of up to approximately 25 kg.

Can the carrying system be adjusted?

Yes. The V2 System can be adjusted to the wearer’s back length.

What is the backpack made from?

The main body and bottom are made from CORDURA® 500 den, while selected areas use 420 HD Nylon FD. Both materials are 100% polyamide.

Does the backpack have MOLLE attachment points?

Yes. MOLLE-compatible attachment areas are located on the front, sides and one hip fin.

Can the lid be removed?

Yes. The lid can be removed, attached to the shoulder straps as a front pouch or used independently as a shoulder bag.

Does the backpack include a rain cover?

Yes. An olive-coloured rain cover is integrated into the bottom compartment.

Is the backpack waterproof?

The outer materials have water-repellent and coated properties, but the complete backpack is not fully waterproof. Use waterproof inner bags for sensitive equipment.

Is it compatible with a hydration system?

Yes. The backpack is prepared for a compatible hydration reservoir and drinking tube.

Is a hydration bladder included?

No hydration system is listed among the included items.

Does it have a separate bottom compartment?

Yes. It has a bottom compartment with a removable divider separating it from the main compartment.

Are first-aid supplies included?

No. The backpack has a dedicated first-aid compartment, but its contents are not included.

Is the DWR finish PFAS-free?

Yes. The supplied product information describes the DWR finish as PFC/PFAS-free.

Glossary

• CORDURA® 500 Den: Durable nylon 6.6 fabric with high resistance to abrasion and tearing.
• 420 HD Nylon FD: High-density 420-denier nylon with a matte Full-Dull finish.
• V2 Carrying System: Adjustable Tatonka carrying system designed to transfer heavier loads efficiently to the hips.
• MOLLE-Compatible: Attachment system allowing compatible pouches and equipment to be mounted externally.
• DWR: Durable water-repellent treatment applied to the outer fabric.
• PFC/PFAS-Free: The stated finish does not use the specified perfluorinated or polyfluorinated chemicals.
• Snow Guard: Drawcord-closed fabric extension that protects the upper opening of the backpack.
• Load-Control Straps: Straps that pull the top of the backpack closer to the wearer.
• Hip Fin: Padded side section of the hip belt that transfers load to the pelvic area.
• SR Buckle: Side-release buckle designed for quick fastening and removal.

Manufacturer & GPSR Information

Manufacturer:
Tatonka GmbH
Robert-Bosch-Str. 3
86453 Dasing
Germany

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.tatonka.com