Description

Berghaus Tactical Pugio 2 Hip Belt Pack – Coyote Tan

Berghaus Tactical Pugio 2 Hip Belt Pack is a compact 2-litre waist bag that can also serve as a removable internal organiser for Pugio-series backpacks. Its adjustable carrying belt can be detached, allowing the pouch’s rear hook-and-loop panel to connect to the loop-lined interior of the Pugio 20, Pugio 28 or Pugio 42.

The main body incorporates RFID-shielding material between the outer and inner fabrics. The separate front zipped pocket is not RFID shielded.

Key Features

• Compact 2-litre tactical waist pack
• Can be worn independently around the waist
• Adjustable, removable carrying belt
• Rear hook-and-loop panel for backpack attachment
• Compatible with Pugio 20, Pugio 28 and Pugio 42 interiors
• RFID-shielding layer in the main body
• Front zipped pocket without RFID shielding
• Main compartment with two-way zip
• Small internal organiser compartment
• Fabric attachment loops on the sides
• 500D polyamide double-ripstop construction
• Coyote Tan colour
• Approximately 2-litre capacity

Two Carrying Configurations

With its belt fitted, the Pugio 2 functions as a compact waist pack for a phone, wallet, identification documents, keys and other small essentials. The strap can be adjusted for fit and detached when it is not required.

After removing the belt, the pouch can be pressed against the hook-and-loop lining inside a compatible Pugio backpack. This creates a removable organiser that can be repositioned or taken out and worn separately when leaving the main pack behind.

RFID-Shielded Main Body

A shielding layer between the outer and inner materials helps reduce unauthorised communication with compatible contactless cards and identity documents stored in the main compartment.

The front zipped pocket is not RFID shielded. Cards requiring protection must be placed fully inside the shielded main section and the compartment must be closed correctly.

RFID shielding is an additional precaution rather than a guarantee against every form of data theft. It does not protect magnetic stripes, visible card information, online accounts or devices using other communication technologies.

Compact Organisation

The two-way zipped main compartment provides space for frequently used personal or operational items. A smaller internal organiser helps separate compact objects, while the flat front pocket keeps items accessible without opening the main section.

Fabric loops on the sides provide additional attachment options for suitable lightweight accessories. Attached equipment must not obstruct the zip, interfere with the belt or create an unsafe snagging point.

500D Double-Ripstop Polyamide

The pouch is made from 500D polyamide double ripstop. Reinforcement threads woven in two directions help limit the spread of small tears while maintaining a practical weight for use as a removable organiser.

No waterproof rating is specified. Electronics, documents and other moisture-sensitive items should be placed in waterproof inner packaging during wet conditions.

Recommended Uses

• Compact waist pack for essential personal items
• Removable organiser inside a Pugio backpack
• Storage for contactless cards and identity documents
• Outdoor, travel and everyday equipment organisation
• Professional or tactical accessory carriage

Technical Specifications

Attachment and Use

1. For waist carry, fit the removable belt and confirm that its buckle and attachment points are secure.
2. Adjust the belt so the pouch is stable but does not restrict movement.
3. For backpack use, remove or stow the carrying belt.
4. Align the rear hook-and-loop panel with a clean loop surface inside the compatible Pugio backpack.
5. Press the complete panel firmly into place and test the attachment before loading the backpack.
6. Store RFID-enabled cards in the main compartment rather than the unshielded front pocket.

Care and Maintenance

• Remove loose dirt with a soft brush or damp cloth.
• Clean locally with lukewarm water and mild detergent.
• Do not use bleach, solvents, fabric softener or abrasive cleaners.
• Allow the pouch to air-dry fully away from direct heat.
• Keep the rear hook-and-loop panel free from fibres and debris.
• Inspect the belt, buckle, seams and zips before use.

Safety and Use Information

• Do not overload the pouch or use it to carry items that can puncture the fabric.
• Place sharp tools in suitable protective sheaths or rigid containers.
• Do not use the belt, side loops or attachment panel for climbing or fall protection.
• Keep the pouch and loose straps away from flames, machinery and moving vehicle parts.
• Test the hook-and-loop attachment before carrying the pouch inside a backpack.
• RFID shielding does not replace normal card, identity and account-security precautions.

Frequently Asked Questions

Glossary

• RFID: Radio-Frequency Identification, used by many contactless cards and identity documents.
• Hook-and-loop: A two-part textile fastening system used for removable attachment.
• 500D: Fabric constructed from 500-denier yarn.
• Double ripstop: Reinforcement threads woven in two directions to help restrict tear propagation.
• Internal organiser: A removable pouch used to separate small equipment inside a larger backpack.

Manufacturer and GPSR Information

Brand owner:
Berghaus Limited
8 Manchester Square
London W1U 3PH
United Kingdom

Customer support:
Berghaus Help Centre

EU importer and Berghaus Tactical EMEA licensee:
LV Equipment BV
Nijverheidsweg 2
4695 RC Sint-Maartensdijk
Netherlands

Website:
www.lvequipment.nl