+371 2022 8895 
info@lynxgear.lv
Tasmanian Tiger Eyewear Safe MOLLE Glasses Case
Description
Tasmanian Tiger Eyewear Safe MOLLE Glasses Case
Tasmanian Tiger TT Eyewear Safe is a fully padded zip case for transporting glasses, sunglasses and compatible protective eyewear. Its MOLLE attachment system allows the case to be secured vertically to suitable backpacks, tactical vests, belts and equipment panels.
The durable CORDURA® 700 den exterior protects against abrasion and everyday contact, while the two-way zip provides convenient access from either direction.
Key Features
- Padded case for glasses and sunglasses
- Additional padding around the complete case
- MOLLE-compatible rear attachment system
- Two-way front zip
- Durable CORDURA® 700 den exterior
- Compact vertical design
- PFC/PFAS-free DWR finish
- Available in black, olive and Coyote Brown
Padded Eyewear Storage
The case surrounds its contents with padding to reduce contact with other equipment inside a bag or while attached externally. Its structured soft-case construction is suitable for many conventional spectacles, sunglasses and compact protective glasses.
The stated dimensions are external measurements. Internal space is smaller because of the padding, so large wraparound glasses or bulky frames should be measured before purchase.
MOLLE Attachment
The rear attachment system connects the case to compatible MOLLE/PALS webbing. This keeps eyewear accessible on a pack, vest or other equipment platform while preserving space inside the main compartment.
Weave the attachment straps through both the case and platform webbing, then secure them fully. A correctly mounted case should not swing, detach or interfere with movement.
Two-Way Zipped Access
Two zip sliders allow the opening position to be adjusted according to how the case is mounted. When attached vertically, the sliders should be positioned so that the case cannot open accidentally and allow the glasses to fall out.
CORDURA® 700 den Fabric
The outer shell is made from CORDURA® 700 den, composed of 100% polyamide. This fabric combines much of the abrasion and tear resistance associated with heavier 1000-denier CORDURA® with a lower weight closer to 500-denier fabric.
A PFC/PFAS-free DWR treatment helps repel light moisture and dirt. The case is not waterproof, and water may enter through the zip, seams or openings.
Recommended Uses
- Prescription glasses
- Sunglasses
- Compact safety and shooting glasses
- Outdoor and tactical equipment setups
- Work, travel and everyday carry
Eyewear is not included. Compatibility depends on the shape and external dimensions of the glasses.
Technical Specifications
| Product | Tasmanian Tiger TT Eyewear Safe |
| Base item number | 7649 |
| Product type | Padded MOLLE-compatible glasses case |
| External dimensions | 18 × 10 × 5 cm |
| Weight | Approximately 130 g |
| Material | CORDURA® 700 den |
| Material composition | 100% polyamide |
| Attachment system | MOLLE |
| Closure | Two-way zip |
| Finish | PFC/PFAS-free DWR |
Colour Variants
| Black | 7649.040 | EAN 4013236089004 |
| Olive | 7649.331 | EAN 4013236986259 |
| Coyote Brown | 7649.346 | EAN 4013236983128 |
Attachment and Use
- Check that the eyewear fits without forcing the frame or lenses against the case.
- Place the glasses inside with the temples folded correctly.
- Close both zip sliders completely.
- Weave the rear straps through compatible MOLLE/PALS webbing.
- Secure the attachment and pull the case gently to confirm that it is stable.
- Check the zip and attachment before active movement.
Care and Maintenance
- Remove loose dirt with a soft brush or damp cloth.
- Clean locally with lukewarm water and mild detergent.
- Do not use bleach, solvents or abrasive cleaners.
- Allow the open case to air-dry completely away from direct heat.
- Remove sand or grit before inserting eyewear.
- Inspect the zip, padding and MOLLE attachment regularly.
Safety and Protection Limitations
- This is a padded textile case, not a rigid crush-proof container.
- Do not place heavy equipment on top of the case.
- The case is not certified for ballistic, impact or occupational eye protection.
- Do not assume that padding will protect fragile eyewear from severe crushing or drops.
- Keep the case away from flames, extreme heat and aggressive chemicals.
- Secure it correctly before attaching it externally to moving equipment.
Frequently Asked Questions
Will every pair of glasses fit?
No. The external dimensions are 18 × 10 × 5 cm, but the usable interior is smaller because of the padding. Large wraparound frames should be measured before purchase.
Can it attach to a MOLLE backpack?
Yes. The rear attachment system is designed for compatible MOLLE/PALS webbing on backpacks, vests and other equipment.
Is the case waterproof?
No. The DWR finish repels light moisture, but water can enter through the zip and seams.
Is it a hard glasses case?
No. It is a heavily padded textile case. It protects against abrasion and ordinary contact but is not certified as crush proof.
Are glasses included?
No. The product consists only of the padded eyewear case.
Glossary
- MOLLE: Modular Lightweight Load-Carrying Equipment; a webbing system for attaching compatible pouches.
- PALS: The grid of webbing commonly used as the mounting surface for MOLLE accessories.
- 700 den: The yarn-density designation used for the CORDURA® outer fabric.
- DWR: Durable Water Repellent; a treatment that helps light moisture bead on the fabric.
- Soft case: A flexible padded container that does not provide the rigidity of a hard shell.
Manufacturer and GPSR Information
Manufacturer:
TATONKA GmbH – Tasmanian Tiger
Robert-Bosch-Str. 3
86453 Dasing
Germany
Contact:
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.tasmaniantiger.info