+371 2022 8895 
info@lynxgear.lv
Cold Steel Voyager Clip Point, Large, folder
Description
Cold Steel Voyager® Clip Point Large Folding Knife 29AC
The Cold Steel Voyager® Clip Point Large is a robust folding utility knife designed for everyday cutting, outdoor use, hunting, camping and demanding work environments. It combines a stonewashed Japanese AUS 10A stainless steel blade, a reinforced Griv-Ex™ handle and Cold Steel’s Tri-Ad® locking mechanism in a practical full-size format.
The plain-edge clip-point blade measures approximately 10.2 cm and provides a versatile combination of slicing capability, a defined point and controlled utility performance. With an overall open length of approximately 23.5 cm and a weight of approximately 130 g, the Voyager® Large offers substantial cutting capacity without excessive weight.
The ergonomic Griv-Ex™ handle is reinforced with heat-treated 6061 aluminium liners and is designed to provide secure control during extended use. An ambidextrous stainless steel pocket clip supports left- or right-handed carry where lawful.
Key Features
- Large full-size folding utility knife
- Versatile clip-point blade profile
- Plain cutting edge
- Japanese AUS 10A stainless steel blade
- Stonewashed blade finish
- Cold Steel Tri-Ad® locking mechanism
- Ergonomic Griv-Ex™ handle
- Heat-treated 6061 aluminium handle liners
- Ambidextrous stainless steel pocket clip
- Suitable for left- or right-handed users
- Approximate blade length of 10.2 cm
- Approximate overall length of 23.5 cm
- Approximate weight of 130 g
- Cold Steel product number 29AC
Versatile Clip-Point Blade
The Voyager® Large uses a clip-point blade with a gently curved cutting edge and a clearly defined tip. This profile is suitable for a broad range of controlled cutting tasks, including slicing, opening packaging, trimming materials and general outdoor utility work.
The approximately 3.5 mm blade thickness provides a practical balance between cutting performance and structural strength.
Japanese AUS 10A Stainless Steel
The blade is manufactured from Japanese AUS 10A stainless steel. This alloy offers a useful combination of corrosion resistance, toughness, edge retention and ease of maintenance.
AUS 10A contains more carbon than some lower-alloy stainless steels, helping it retain a working edge while remaining practical to sharpen with suitable equipment.
Actual edge performance depends on the material being cut, sharpening angle, cutting technique and maintenance.
Stonewashed Blade Finish
The blade has a stonewashed finish that gives the steel a subdued, low-glare appearance. This treatment also helps disguise minor scratches and marks that may develop during normal working use.
The finish does not eliminate the need for cleaning and maintenance, particularly after exposure to salt, moisture, acidic materials or adhesive residue.
Tri-Ad® Locking Mechanism
The Voyager® is equipped with Cold Steel’s Tri-Ad® lock, a reinforced back-lock system designed to provide strong and secure blade retention during normal use.
No folding-knife lock is completely failure-proof. Users should confirm that the blade is fully locked before cutting, keep fingers away from the closing path and avoid prying, twisting or impact loads.
Reinforced Griv-Ex™ Handle
The approximately 13.3 cm handle is made from Griv-Ex™, a tough fibre-reinforced synthetic material selected for strength, low weight and resistance to moisture.
Heat-treated 6061 aluminium liners reinforce the handle structure while maintaining a manageable overall weight. The textured ergonomic profile is designed to support a secure grip during prolonged or demanding tasks.
Ambidextrous Pocket Clip
The Voyager® Large includes an ambidextrous stainless steel pocket clip that supports left- or right-handed carry configurations.
The clip and mounting screws should be checked periodically for looseness. The presence of a pocket clip does not confirm that carrying the knife in public is lawful in every location.
Recommended Use
- Everyday utility cutting
- Opening boxes and packaging
- Cutting rope, webbing and cordage
- Camping and campsite tasks
- Hiking and general outdoor use
- Lawful hunting-related utility work
- Workshop and equipment maintenance tasks
- Emergency preparedness equipment
- Collection and lawful everyday carry
The knife is not designed for prying, chiselling, hammering, throwing or use as a screwdriver.
Technical Specifications
| Product Name | Cold Steel Voyager® Clip Point Large |
| Product Type | Large folding utility knife |
| Product Number | 29AC |
| Blade Material | Japanese AUS 10A stainless steel |
| Blade Profile | Clip point |
| Edge Type | Plain edge |
| Blade Finish | Stonewashed |
| Overall Length | Approx. 23.5 cm |
| Blade Length | Approx. 10.2 cm |
| Blade Thickness | Approx. 3.5 mm |
| Handle Length | Approx. 13.3 cm |
| Handle Material | Griv-Ex™ |
| Handle Reinforcement | Heat-treated 6061 aluminium liners |
| Locking Mechanism | Tri-Ad® lock |
| Pocket Clip | Ambidextrous stainless steel clip |
| Weight | Approx. 130 g |
| Sharpened Edge | Yes |
Why Choose the Cold Steel Voyager® Clip Point Large?
The Voyager® Large is designed for users who want a dependable full-size folding knife with a practical blade profile and robust locking system. Its clip-point blade offers versatility for everyday and outdoor cutting, while the AUS 10A stainless steel provides a useful balance of edge retention, toughness and corrosion resistance.
The reinforced Griv-Ex™ handle combines secure control with relatively low weight, and the ambidextrous pocket clip makes the knife adaptable for left- or right-handed users.
Its combination of size, cutting performance and durable construction makes it suitable for demanding utility work as well as general outdoor use.
Care and Maintenance
- Clean the blade after every use.
- Remove moisture, dirt, sap and adhesive residue promptly.
- Dry the knife thoroughly before storage.
- Apply a small amount of suitable lubricant to the pivot when necessary.
- Use a light protective oil during extended storage or after exposure to corrosive environments.
- Use food-safe oil if the knife may contact food.
- Inspect the blade, pivot, lock, handle and liners regularly.
- Confirm that the Tri-Ad® lock engages fully before use.
- Check the pocket clip and mounting screws for looseness.
- Sharpen using suitable equipment while preserving the original edge geometry.
- Avoid overheating the blade during powered sharpening.
- Do not place the knife in a dishwasher.
- Store securely and away from children and unauthorised persons.
Safety Information
- This is a sharpened folding knife and may cause serious or fatal injury.
- Keep fingers clear of the blade path when opening and closing the knife.
- Confirm that the locking mechanism is fully engaged before use.
- Cut away from the body and other people.
- Use a stable working surface whenever possible.
- Do not use excessive force.
- Do not use the knife for prying, twisting, hammering or heavy impact work.
- Do not throw the knife.
- Stop using it if the blade, pivot, lock, handle or liners are damaged.
- Keep the knife folded when not in use.
- Carry and transport it only where lawful.
- Store securely and out of reach of children and unauthorised persons.
Legal and Responsible Use Notice
This product must be purchased, possessed, carried, transported and used only in accordance with the laws and regulations applicable in the customer’s country, region and municipality.
The customer is responsible for determining whether the purchase, possession, carriage, transport or use of this knife is lawful in their location and for using it safely, responsibly and only for lawful purposes. The seller does not encourage, recommend or authorise unlawful, threatening, offensive or harmful use.
Classification of this product within a folding knife, everyday carry, hunting, camping, survival, rescue, military, police, tactical or self-defence category does not constitute legal advice, confirmation that it may legally be carried in public or for self-defence, or a recommendation to use it against another person.
Applicable laws may differ according to blade length, locking mechanism, intended use, location, manner of transport and surrounding circumstances. Misuse may cause serious injury, death, property damage or legal consequences.
The knife must be transported securely, kept folded when not in use and stored away from children and unauthorised persons.
This notice does not exclude or limit any statutory consumer rights or legal obligations that cannot lawfully be excluded.
FAQ
What steel is used for the Cold Steel Voyager® Large?
The blade is made from Japanese AUS 10A stainless steel.
Is AUS 10A corrosion resistant?
Yes. AUS 10A is a stainless steel with good corrosion resistance, although the blade should still be cleaned and dried after use.
How does AUS 10A compare with AUS 8A?
AUS 10A generally offers improved edge retention while maintaining useful toughness and corrosion resistance.
What type of blade does this model have?
This model has a large plain-edge clip-point blade.
What does stonewashed mean?
A stonewashed finish creates a subdued, lightly textured surface that helps conceal minor marks from normal use.
What locking mechanism does the knife use?
The Voyager® uses Cold Steel’s Tri-Ad® locking mechanism.
What is the handle made from?
The handle is made from Griv-Ex™ and reinforced with heat-treated 6061 aluminium liners.
Is the pocket clip suitable for left-handed users?
Yes. The stainless steel clip is ambidextrous and can be configured for left- or right-handed carry.
How long is the blade?
The blade length is approximately 10.2 cm.
How long is the knife when open?
The overall open length is approximately 23.5 cm.
How thick is the blade?
The blade is approximately 3.5 mm thick.
How much does the Voyager® Large weigh?
The knife weighs approximately 130 g.
Is the Voyager® suitable for outdoor use?
Yes. Its corrosion-resistant blade, reinforced synthetic handle and versatile clip-point profile make it suitable for lawful camping, hunting and general outdoor utility tasks.
Can it be used for rescue applications?
It may be useful for lawful emergency cutting tasks such as cutting suitable rope or webbing. It is not a substitute for specialised rescue equipment or professional training.
Can it legally be carried in public?
This depends on applicable local law, the reason for carrying it and the surrounding circumstances. The locking blade and approximately 10.2 cm blade length may be subject to restrictions in some jurisdictions.
What is the Cold Steel product number?
The Cold Steel product number is 29AC.
Glossary
- Clip Point: Blade profile in which part of the spine slopes or curves towards the tip, creating a defined point.
- AUS 10A Stainless Steel: Japanese stainless steel offering a balance of corrosion resistance, toughness and edge retention.
- Stonewashed Finish: Subdued blade finish created through controlled abrasive tumbling.
- Tri-Ad® Lock: Reinforced back-lock mechanism developed by Cold Steel for secure blade retention.
- Griv-Ex™: Fibre-reinforced thermoplastic used for strong, lightweight and weather-resistant handles.
- 6061 Aluminium: Heat-treatable aluminium alloy valued for strength and low weight.
- Liner: Internal structural plate used to reinforce a folding-knife handle.
- Plain Edge: Continuous sharpened cutting edge without serrations.
- Ambidextrous Clip: Pocket clip configurable for left- or right-handed carry.
Manufacturer & GPSR Information
Manufacturer:
GSM Outdoors, LLC
5250 Frye Road
Irving, TX 75061
United States
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Responsible Person in the EU:
Battle-Merchant Wacken GmbH & Co. KG
Gehrn 4
25596 Wacken
Germany