+371 2022 8895 
info@lynxgear.lv
F. DICK SM-111 Water-Cooled Knife Sharpening Machine
Description
F. DICK SM-111 Water-Cooled Knife Sharpening Machine
The F. DICK SM-111 is a professional machine for grinding, honing and polishing knives quickly and consistently. Water-cooled grinding wheels help prevent blade overheating, while magnetic guides hold the knife at a controlled angle.
Counter-rotating honing wheels remove the burr after grinding, and the integrated felt polishing wheel provides a refined final finish. Its low material removal helps preserve the blade and reduce long-term sharpening costs.
Key Features
- Three-stage grinding, honing and polishing system
- Water-cooled grinding wheels
- Magnetic guides for controlled sharpening angles
- Low blade-material removal
- Counter-rotating honing wheels for burr removal
- Felt wheel for final edge polishing
- Reversible grinding wheels for extended service life
- Dressing device for cleaning and truing the wheels
Sharpening Process
- Grinding: Water-cooled wheels restore the cutting bevel while limiting heat buildup.
- Honing: Counter-rotating wheels remove the burr produced during grinding.
- Polishing: The felt wheel refines and finishes the cutting edge.
Technical Specifications
| Product | F. DICK SM-111 |
|---|---|
| Model / product number | 9821000 |
| Functions | Grinding, honing and polishing |
| Cooling system | Water-cooled grinding wheels |
| Voltage | 1-phase 230 V |
| Frequency | 50/60 Hz |
| Power | 130 W |
| Length | 46.2 cm |
| Width | 33.7 cm |
| Height | 29.3 cm |
| Weight | 15.42 kg |
| Sound pressure level | 76 dB(A) |
Technical specifications may vary between production versions. Confirm the voltage, plug and identification plate before installation.
Safe Operation
- Read the operating instructions before using the machine.
- Place it on a stable, level and water-resistant work surface.
- Fill and maintain the water tray as specified by the manufacturer.
- Wear suitable eye protection and keep hands clear of rotating components.
- Allow only trained users to adjust or operate the machine.
- Disconnect the power supply before cleaning, maintenance or wheel replacement.
Frequently Asked Questions
What operations can the SM-111 perform?
It combines knife grinding, burr removal by honing and final edge polishing in one machine.
Why are the grinding wheels water-cooled?
Water cooling limits heat buildup during grinding, helping protect the blade structure and cutting edge.
How do the magnetic guides help?
They support the knife during grinding and help maintain a consistent sharpening angle on both sides of the blade.
How long do the grinding wheels last?
The wheels can be reversed after one side has worn, extending their service life. Depending on use and maintenance, they can provide up to approximately 2,000 sharpening cycles.
Is the SM-111 intended for professional use?
Yes. Its construction and three-stage sharpening process are designed for professional environments where knives require regular maintenance.
Glossary
- Grinding
- Removing blade material to restore the cutting bevel and edge geometry.
- Honing
- Removing the fine burr and refining the edge after grinding.
- Burr
- A thin ridge of metal formed along the cutting edge during grinding.
- Wheel dressing
- Cleaning and reshaping a grinding wheel so that it runs evenly.
Manufacturer and GPSR Information
Manufacturer and EU responsible economic operator:
Friedr. Dick GmbH & Co. KG
Esslinger Straße 4–10
73779 Deizisau
Germany
Contact:
Telephone: +49 7153 817-0
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.dick.de